Artwork: black on white
enlarge on xerox
(Canon Laser Copier: high-contrast, fine-photo, reversals)
xerox transparency

(direct onto transparency)


CLEAR PARTS: NO PAINT GOES THROUGH (light hardens the emulsion)

Black lines on yr transparency is where ink will be applied
when you screen


----------------
IN REDUCED LIGHT

accurate measures!
Mix photoemulsion 4:1 (8 ml:2ml was OK amount for one screen)

coat w/ piece of cardboard
make very very thin
dry inside a dark box (air, etc)
must use within 6 hours else it hardens by itself

(artwork direct onto screen)

----------------
EXPOSURE
(see photo)
xerox transparencies -- make two
put transparency onto screen FACE DOWN -- you're making the
bottom
of the screen
cover with glass (holds it flat NECESSARY)

10 x 14" screen -- height 12in
100 watt reflector bulb			1 hour
150 watt reflector bulb (photo) 	45 minutes
#1 photo flood				11 minutes

12 x 18 & up -- height 17in
150 watt reflector			1 hr 32 min
#1 photo flood				18 minutes

measure accurately!


SCREENING

water soluble inks
W vs T!!!
squeegee

frames from canvas stretchers or sticks
coat hangers
cardboard inside shirt