#ifndef lint static char rcsid[] = "$Id: crc.c,v 1.1.1.2 92/11/02 18:20:37 genek Exp $"; #endif /* * crc.c * * signature function hook for CRC-16. * * Gene Kim * Purdue University * October 14, 1992 */ /* ============================================================= */ /* COPYRIGHT (C) 1986 Gary S. Brown. You may use this program, or */ /* code or tables extracted from it, as desired without restriction. */ /* */ /* First, the polynomial itself and its table of feedback terms. The */ /* polynomial is */ /* X^32+X^26+X^23+X^22+X^16+X^12+X^11+X^10+X^8+X^7+X^5+X^4+X^2+X^1+X^0 */ /* */ /* Note that we take it "backwards" and put the highest-order term in */ /* the lowest-order bit. The X^32 term is "implied"; the LSB is the */ /* X^31 term, etc. The X^0 term (usually shown as "+1") results in */ /* the MSB being 1. */ /* */ /* Note that the usual hardware shift register implementation, which */ /* is what we're using (we're merely optimizing it by doing eight-bit */ /* chunks at a time) shifts bits into the lowest-order term. In our */ /* implementation, that means shifting towards the right. Why do we */ /* do it this way? Because the calculated CRC must be transmitted in */ /* order from highest-order term to lowest-order term. UARTs transmit */ /* characters in order from LSB to MSB. By storing the CRC this way, */ /* we hand it to the UART in the order low-byte to high-byte; the UART */ /* sends each low-bit to hight-bit; and the result is transmission bit */ /* by bit from highest- to lowest-order term without requiring any bit */ /* shuffling on our part. Reception works similarly. */ /* */ /* The feedback terms table consists of 256, 32-bit entries. Notes: */ /* */ /* The table can be generated at runtime if desired; code to do so */ /* is shown later. It might not be obvious, but the feedback */ /* terms simply represent the results of eight shift/xor opera- */ /* tions for all combinations of data and CRC register values. */ /* */ /* The values must be right-shifted by eight bits by the "updcrc" */ /* logic; the shift must be unsigned (bring in zeroes). On some */ /* hardware you could probably optimize the shift in assembler by */ /* using byte-swap instructions. */ /* polynomial $edb88320 */ /* */ /* -------------------------------------------------------------------- */ #include "../../include/config.h" #include #include #ifdef STDLIBH #include #include #endif #include "../../include/sigs.h" #define BUFSIZE 4096 static unsigned int crc16; static unsigned int crc16tab[256] = { 0x0000, 0xC0C1, 0xC181, 0x0140, 0xC301, 0x03C0, 0x0280, 0xC241, 0xC601, 0x06C0, 0x0780, 0xC741, 0x0500, 0xC5C1, 0xC481, 0x0440, 0xCC01, 0x0CC0, 0x0D80, 0xCD41, 0x0F00, 0xCFC1, 0xCE81, 0x0E40, 0x0A00, 0xCAC1, 0xCB81, 0x0B40, 0xC901, 0x09C0, 0x0880, 0xC841, 0xD801, 0x18C0, 0x1980, 0xD941, 0x1B00, 0xDBC1, 0xDA81, 0x1A40, 0x1E00, 0xDEC1, 0xDF81, 0x1F40, 0xDD01, 0x1DC0, 0x1C80, 0xDC41, 0x1400, 0xD4C1, 0xD581, 0x1540, 0xD701, 0x17C0, 0x1680, 0xD641, 0xD201, 0x12C0, 0x1380, 0xD341, 0x1100, 0xD1C1, 0xD081, 0x1040, 0xF001, 0x30C0, 0x3180, 0xF141, 0x3300, 0xF3C1, 0xF281, 0x3240, 0x3600, 0xF6C1, 0xF781, 0x3740, 0xF501, 0x35C0, 0x3480, 0xF441, 0x3C00, 0xFCC1, 0xFD81, 0x3D40, 0xFF01, 0x3FC0, 0x3E80, 0xFE41, 0xFA01, 0x3AC0, 0x3B80, 0xFB41, 0x3900, 0xF9C1, 0xF881, 0x3840, 0x2800, 0xE8C1, 0xE981, 0x2940, 0xEB01, 0x2BC0, 0x2A80, 0xEA41, 0xEE01, 0x2EC0, 0x2F80, 0xEF41, 0x2D00, 0xEDC1, 0xEC81, 0x2C40, 0xE401, 0x24C0, 0x2580, 0xE541, 0x2700, 0xE7C1, 0xE681, 0x2640, 0x2200, 0xE2C1, 0xE381, 0x2340, 0xE101, 0x21C0, 0x2080, 0xE041, 0xA001, 0x60C0, 0x6180, 0xA141, 0x6300, 0xA3C1, 0xA281, 0x6240, 0x6600, 0xA6C1, 0xA781, 0x6740, 0xA501, 0x65C0, 0x6480, 0xA441, 0x6C00, 0xACC1, 0xAD81, 0x6D40, 0xAF01, 0x6FC0, 0x6E80, 0xAE41, 0xAA01, 0x6AC0, 0x6B80, 0xAB41, 0x6900, 0xA9C1, 0xA881, 0x6840, 0x7800, 0xB8C1, 0xB981, 0x7940, 0xBB01, 0x7BC0, 0x7A80, 0xBA41, 0xBE01, 0x7EC0, 0x7F80, 0xBF41, 0x7D00, 0xBDC1, 0xBC81, 0x7C40, 0xB401, 0x74C0, 0x7580, 0xB541, 0x7700, 0xB7C1, 0xB681, 0x7640, 0x7200, 0xB2C1, 0xB381, 0x7340, 0xB101, 0x71C0, 0x7080, 0xB041, 0x5000, 0x90C1, 0x9181, 0x5140, 0x9301, 0x53C0, 0x5280, 0x9241, 0x9601, 0x56C0, 0x5780, 0x9741, 0x5500, 0x95C1, 0x9481, 0x5440, 0x9C01, 0x5CC0, 0x5D80, 0x9D41, 0x5F00, 0x9FC1, 0x9E81, 0x5E40, 0x5A00, 0x9AC1, 0x9B81, 0x5B40, 0x9901, 0x59C0, 0x5880, 0x9841, 0x8801, 0x48C0, 0x4980, 0x8941, 0x4B00, 0x8BC1, 0x8A81, 0x4A40, 0x4E00, 0x8EC1, 0x8F81, 0x4F40, 0x8D01, 0x4DC0, 0x4C80, 0x8C41, 0x4400, 0x84C1, 0x8581, 0x4540, 0x8701, 0x47C0, 0x4680, 0x8641, 0x8201, 0x42C0, 0x4380, 0x8341, 0x4100, 0x81C1, 0x8081, 0x4040 }; static void UpdateCRC16(buffer, bufsize) unsigned char *buffer; int bufsize; { register unsigned int i, tmp; for (i = 0; i < bufsize; i++) { tmp = crc16 ^ buffer[i]; crc16 = (crc16 >> 8) ^ crc16tab[tmp & 0xff]; /* crc16 = (crc16 >> 8) ^ crc16tab[((crc16 ^ buffer[i]) & 0xff)]; */ } } sig_crc_get(fd_in, ps_signature, siglen) int fd_in; char *ps_signature; int siglen; { unsigned char buffer[BUFSIZE]; int readin = -1; int scratch[100]; if (lseek(fd_in, 0, SEEK_SET) < 0) { perror("sig_crc_get: lseek()"); exit(1); } crc16 = 0; while ((readin = read(fd_in, (char *)buffer, (off_t) BUFSIZE)) == BUFSIZE) { UpdateCRC16(buffer, BUFSIZE); } if (readin != 0) { UpdateCRC16(buffer, readin); } sprintf(ps_signature, "%s", ltob64((unsigned long)(crc16 & 0xFFFF), (char *)scratch)); return 0; }